Active reset register

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

Active reset register

跳至解决方案
2,203 次查看
qiu
Contributor I

hello

I use the s32k146 chip,and the watchdog resets when it goes timeout.Now i want to add a funcion to reset the system actively,Does the chip have a active reset register?

Best regards!

0 项奖励
回复
1 解答
2,195 次查看
Robin_Shen
NXP TechSupport
NXP TechSupport

Hi qiu,

Please check whether the Software reset (SW)  meets your needs:

25.2.2.7 Software reset (SW).png


Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

在原帖中查看解决方案

0 项奖励
回复
2 回复数
2,196 次查看
Robin_Shen
NXP TechSupport
NXP TechSupport

Hi qiu,

Please check whether the Software reset (SW)  meets your needs:

25.2.2.7 Software reset (SW).png


Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

0 项奖励
回复
2,184 次查看
Guofred
Contributor III

Hi @Robin_Shen ,

Thanks for sharing the information.

would you like to share the software reset sample code by using S32K116 MCU.

After the assignment as below method, use the Debug tool to observe that the value does not change, and the reset fails, would you like to share your comments. thanks. 

Guofred_0-1644990608128.png

Best regards.

Guofred

0 项奖励
回复