M core pfe_master failed to start

[youke]

Hi，NXP，

I tested the MasterProject_RDB2 program in PFE-DRV_S32G_M7_MCAL_1.3.0 using the s32g2rdb2 hardware;
I compiled the Master program in DS to completion, and used the autosar_intram.gld link file to successfully generate elf, bin files.
I debugged the program using Lauterbach and found that the initialization in main ran (added the uart1 module and uart was output correctly).
After configuring ivt for the bin file, burning into qpsi and booting, uart1 does not output, what do I need to do?

IVT configuration with map file is as follows：

youke_0-1753252608087.png

[chenyin_h]

Hi, @youke 

Thanks for your reply.

Would you mind sharing the full picture of your IVT settings?

BR

Chenyin

[chenyin_h]

Hello, @youke 

Thanks for your post.

Would you mind trying to modify the ram start pointer to 0x34390000 to have a further test?

BR

Chenyin

[youke]

Hi，

I changed it as requested and no uart prints

youke_0-1753338282759.png