HOWTO: Update OpenSDA Firmware on EVB

[#1]

If your EVB with OpenSDA debugger can't start debug session - you can try to update OpenSDA firmware on your board. 

• Go to PE Micro web pages - http://www.pemicro.com/opensda/ and get the latest firmware archive. 
• Extract .SDA file related to your EVB - for example

           DEBUG-OPENSDA-E200_Pemicro_v110.SDA for DEVKIT-MPC5748G

           MSD-DEBUG-EVB-S32K144_Pemicro_v119.SDA for S32K144EVB 

• Press and hold SW3 (Reset for S32K144EVB) button and connect OpenSDA connector on EVB to PC. New BOOTLOADER Drive should appear on your PC. 
• Copy .SDA file in BOOTLOADER drive
• Reset EVB.  

More details you can find in "Updating the OpenSDA Firmware.pdf" file. It is part of downloaded zip file from PE Micro web pages. 

[양승도]

I tried to FRDM-KE06Z as your explaination. however, it failed programming the bootloader.

and I has a Multilink unversal FX. How to program the bootloader via SDA port for openSDA MCU.

There are only *.sda files such as MSD-DEBUG-FRDM-KE06Z_Pemicro_v118.SDA and MSD-DEBUG-FRDM-KE06Z_Pemicro_v114.SDA.