RD9Z1-638-4Li Coding Environment Problems

[Curry_Xuan]

您好，恩智浦合作伙伴。我购买了 RD9Z1 - 638 - 4Li 开发板和 BDM 编程器。您能告诉我应该从官网下载什么软件来设置编程和烧录环境吗？谢谢

Hello, NXP partner. I purchased the RD9Z1-638-4Li development board and BDM programmer. Can you tell me what software I should download from the official website to set up the programming and burning environment? Thank you

[lama · Accepted solution]

Have you downloaded and read the user guide?

You can find it here

https://www.nxp.com/design/design-center/development-boards-and-designs/mm9z1-638-4-cell-lithium-bat...

I suggest to visit www.pemcro.com for the last USB BDM multilink interface compatible with Windows11 and S12Z family.

Then you will need to download CodeWarrior® for MCUs (Eclipse IDE) - ColdFire®, 56800/E DSC, Qorivva® 56xx, RS08/S08, S12Z - 11.1

https://www.nxp.com/design/design-center/software/development-software/codewarrior-development-tools...

Here you can see differences between versions

https://www.nxp.com/design/design-center/software/development-software/codewarrior-development-tools...

Best regards,

Ladislav