TJA1040T Part Numbers

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

TJA1040T Part Numbers

跳至解决方案
4,124 次查看
robcoode
Contributor I

Dear Sirs

What is the difference between TJA1040T/CM & TJA1040T/VM, other than the VM is obsolete & the CM is still active?

Best Regards

Rob Coode

Engineering Documentation Manager

For & on behalf of:

Electro Assembly Services Ltd

Unit 5, Lancaster Way

Earls Colne Business Park

Earls Colne

Colchester, Essex CO6 2NS

Tel : 01787 478771 (Ext #204)

Fax: 01787 478772

Email: [email protected]<mailto:[email protected]>

www: www.electroassembly.com

P Please consider the environment - do you really need to print this email?

Electro Assembly Services Ltd is registered in England No. 03367217.

E-mail Confidentiality Notice and Disclaimer.

This email and any files transmitted with it are confidential and intended solely for those named recipients only. It may be privileged and/or confidential. If you are not the intended named recipient of this email then you should not copy it or use it for any purpose, nor disclose its content to any other person. You should contact Electro Assembly Services Ltd as shown above so that we can take the appropriate action. This email may not represent the views of policy of the company. This email and its attachments have been scanned for known viruses using multiple scanners. however the recipient must take full responsibility for virus checking as Electro Assembly Services Limited accepts no liability for any damage caused by any virus.

0 项奖励
回复
1 解答
4,035 次查看
TomasVaverka
NXP TechSupport
NXP TechSupport

Dear Rob,

This IC was moved from our DHAM Fab to our ICN8 Fab, as part of this move the device received a BOM update to bring it in line with our newer products produced in ICN8. There were no changes made to the active area of the die, so there should be no electrical difference between the two versions.

Best regards,

Tomas

在原帖中查看解决方案

0 项奖励
回复
2 回复数
4,036 次查看
TomasVaverka
NXP TechSupport
NXP TechSupport

Dear Rob,

This IC was moved from our DHAM Fab to our ICN8 Fab, as part of this move the device received a BOM update to bring it in line with our newer products produced in ICN8. There were no changes made to the active area of the die, so there should be no electrical difference between the two versions.

Best regards,

Tomas

0 项奖励
回复
4,035 次查看
robcoode
Contributor I

Thanks Tomas, very much appreciated.

Regards

Rob Coode

Engineering Documentation Manager

For & on behalf of:

Electro Assembly Services Ltd

Tel : 01787 478771 (Ext #204)

Fax: 01787 478772

Electro Assembly Services Ltd is registered in England No. 03367217.

E-mail Confidentiality Notice and Disclaimer.

This email and any files transmitted with it are confidential and intended solely for those named recipients only. It may be privileged and/or confidential. If you are not the intended named recipient of this email then you should not copy it or use it for any purpose, nor disclose its content to any other person. You should contact Electro Assembly Services Ltd as shown above so that we can take the appropriate action. This email may not represent the views of policy of the company. This email and its attachments have been scanned for known viruses using multiple scanners. however the recipient must take full responsibility for virus checking as Electro Assembly Services Limited accepts no liability for any damage caused by any virus.

0 项奖励
回复