Suitable SPI Mode for SBCFS2613

[Sivahari]

Hi Nxp,

I have referred the FS2613 datasheet and it is mentioned as " The MISO data is latched at the SCLK rising edge and MOSI data is latched at the SCLK falling edge". 

Basically, SPI modes decide the data sampling and data shifting based on clock edge.

So, in which SPI mode, SBC could be able to communicate?

Thanks for understanding.

[RafaR]

Hello Sivahari

Good day!

You can work in mode 1 without any problems

I hope this information has helped you, please let me know if you need help with anything else.

Have a great day and best of luck.

[Sivahari]

Hi RafaR,

Thanks for clarification.

In addition of your quick support could you help me that where I could refer these kinds of in-depth details further.

Thanks for your support.

[RafaR · Accepted solution]

Hello Sivahari

Good day!

I recommend you take a look at:

AN13322 NXP SBC solution for Infineon AURIX TC2xx/TC3xx series MCU

FS26 Product Datasheet 4.5

These documents are located in the FS26 secure files; they don't cover it directly, but they give a general idea. I also found a couple of cases in the community that might be useful.

https://community.nxp.com/t5/Other-NXP-Products/FS26-FS-STATES-amp-SPI-Communication/m-p/2019073

I hope this information has helped you, please let me know if you need help with anything else.

Have a great day and best of luck.