Streaming AR0144 ( ap1302) in iMX95 Verdin Evaluation Kit

[Harish_V]

I am working on iMX95 Verdin evaluation kit, I am trying to port ap1302 which was given default support. I have copied the firmware .bin from git and have placed it inside /lib/firmware. The camera gets detected and 3C gets utilised in i2c bus 2 , I am unable to stream the camera. Do we have to set any media bus ? Has anyone come across this issue ? Kindly do let me know the solution for this. Thanks.

[joanxie]

do you mind sharing with me what command do you use and what bsp version you test? and pls share the logfile when you capture the streaming, pls share more detailed information

[Harish_V]

I am using the v4l2-ctl -d 0 --stream-mmap  command.

I have currently flashed the board with the default package.
For Alpha - A1 Silicon:
sudo ./uuu -v -b emmc_all ./imx-boot-imx95-a1-19x19-verdin-sd.bin-flash_all \
./imx-image-full-imx95-19x19-verdin.wic

I am using the imx95-19x19-verdin-lt8912-ap1302.dtb

In i2cdetect -y -r 2 , 3C and 34 is getting UU utilised.

When i give stream on I get , 
VIDIOC_QUERYCAP: ok
VIDIOC_REQBUFS returned 0 (Success)
VIDIOC_CREATE_BUFS returned 0 (Success)
VIDIOC_QUERYBUF returned 0 (Success)
VIDIOC_QUERYBUF returned 0 (Success)
VIDIOC_QUERYBUF returned 0 (Success)
VIDIOC_QUERYBUF returned 0 (Success)
VIDIOC_G_FMT returned 0 (Success)
VIDIOC_QBUF returned 0 (Success)
VIDIOC_QBUF returned 0 (Success)
VIDIOC_QBUF returned 0 (Success)
VIDIOC_QBUF returned 0 (Success)
VIDIOC_STREAMON returned -1 (Broken pipe)

[joanxie]

I checked that this board is under Alpha and beta program support, so you need contact toradex directly

https://www.toradex.com/support