SPI Adapter for the NFC Cockpit

[dakhnod]

Hello,

I discovered your discovery board for the PN5180 and the other readers,  which seems to have a USB<->SPI adapter on board, so the NfcCockpit can use it to communicate to something like the PN5180.

My question is: Is there any firmware that accomplishes the same thing, but is Arduino-based?

I have a lot of boards based on esp32 or rp2040, but they do not seem supported by the firmware you provide....

[dakhnod · Accepted solution]

Hi, thanks for the suggestions!

I ended up designing my own solution: https://github.com/dakhnod/NFCCockpitSPIAdapter

Thanks again!

[KaiLi]

Hello @dakhnod 

1. My question is: Is there any firmware that accomplishes the same thing, but is Arduino-based?

No, there is no firmware based on Arduino.

2. I have a lot of boards based on esp32 or rp2040, but they do not seem supported by the firmware you provide....

you could port NFC COCKPIT VCOM to tesp32 or rp2040, soure code can be downloaded from NFC Cockpit | NXP Semiconductors