2363012_en-US

はい

S32K344 / S32K3 CAN FD Firmware Consultant Needed

Hi everyone,

We are looking for an experienced NXP S32K344 / S32K3 firmware consultant for an automotive embedded project.

Key experience needed:

S32K344 / S32K3
FlexCAN / CAN FD
Real-time interrupt-driven firmware
eDMA / hardware CRC / watchdog
HSE secure boot or firmware protection
Automotive EMC/EMI robustness
CAN FD debugging with analyzer, oscilloscope, or logic analyzer

The project requires low-latency CAN FD processing, reliable fault recovery, and production-grade firmware design.

Please contact me by private message if you have relevant experience.
If this post is not appropriate for this forum, please let me know where it should be posted.

Thanks.

Re: S32K344 / S32K3 CAN FD Firmware Consultant Needed

Hi,

for this type of request, please note the available NXP support channels:

Free written support is provided via the NXP Community and the NXP Case portal. These are the recommended paths for technical questions, configuration guidance, and issue clarification.
Direct support can also be requested through your local NXP FAE, if assigned. If you haven't direct FAE you need to go via your local distributor, https://www.nxp.com/support/sample-and-buy/distributor-network:DISTRIBUTORS
For deeper involvement such as firmware review, architecture consulting, debugging sessions, or custom development, NXP offers professional paid support services. See more in https://www.nxp.com/support/support/nxp-engineering-services:SW-SUPPORT

The Community forum is best suited for specific technical questions or problem descriptions rather than open-ended consulting engagements. If your project requires hands-on assistance or guaranteed response times, engaging paid support would be the appropriate option.

BR, Petr