I2C read and write using s32k144 MBD toolbox

[Sriram]

Hello,

I am using s32k144 to read and write data from an external EEPROM. I will attach the model below. I am able to write the data but the read returns 255+NACK as output. Am i missing something here

Sriram_0-1737789999186.png

Sriram_1-1737790013461.png

Is there a way to specify the register address of the EEPROM in the I2Cmaster block

Sriram_2-1737790096449.png

Can you guys help me out with this issue.
Thanks

[Sriram]

I m using M24C02-DRE EEPROM