Excel MPC5744P Clock Configurator

[#1]

This config tool simplifies PLL setting calculation and clock configuration for MPC5744P device.

Follow these steps

Note: Macros have to be enabled!

1. 1. Enter frequency of used XOSC and desired PLL0 and PLL1 output.

                - put values into cells B11, Q10 and Q17 of the "Clocks" sheet

                - check if it is Valid or Invalid

                - "PLLconfig" sheet shows possible PLLs configurations

1. 2. Configure System and AUX clock selectors and its Dividers

                - check calculated frequency of System/Peripheral clocks

                - if Invalid change source clock and Divider value to keep Max freq

  3. Copy generated code by pressing "Copy Code" button

[erreer]

Example MPC5744P FlexCAN TX RXFIFO ISR GHS614     can not download