Does MCUXPresso IDE support third-part DAPLink debugger ？

[jimmyli]

Hi NXP,

      I find that the lasted MCUXpresso IDE only support MCU-Link/JLink/PEmicro, not for other third-part debuggers which are followed to ARM DAPLink (CMSIS-DAP V2), which can be supported by Keil and IAR.

      This is very inconvenient for us and other customers to develop the projects.

      So, does NXP plan to support other DAPLink debugger in MCUXpresso IDE ?

      Thanks.

[Celeste_Liu]

Hello @jimmyli ,

Thanks for your post.

So, does NXP plan to support other DAPLink debugger in MCUXpresso IDE ?

->> Sorry, we don't have this plan. We recommend using MCU Link JTAG/SWD Debug Probe | NXP Semiconductors

Have a nice day.

BR

Celeste

[jimmyli]

Hi Celeste,

      Got it.

      Thanks very much.

      But, as said before, only supporting the three debuggers is limited to promote NXP MCUXpresso IDE in china.

      Hope you can give a feedback internally.

      Thanks again.

[Celeste_Liu]

Hello @jimmyli ,

Sure, I will share your suggestions with the internal.

BR

Celeste

[jimmyli]

Hi Celeste,

      Thanks very much.