- Forums
- Product Forums
- General Purpose MicrocontrollersGeneral Purpose Microcontrollers
- i.MX Forumsi.MX Forums
- QorIQ Processing PlatformsQorIQ Processing Platforms
- Identification and SecurityIdentification and Security
- Power ManagementPower Management
- Wireless ConnectivityWireless Connectivity
- RFID / NFCRFID / NFC
- Advanced AnalogAdvanced Analog
- Neural Processing UnitsNeural Processing Units
- MCX Microcontrollers
- S32G
- S32K
- S32V
- MPC5xxx
- Other NXP Products
- S12 / MagniV Microcontrollers
- Powertrain and Electrification Analog Drivers
- Sensors
- Vybrid Processors
- Digital Signal Controllers
- 8-bit Microcontrollers
- ColdFire/68K Microcontrollers and Processors
- PowerQUICC Processors
- OSBDM and TBDML
- S32M
- S32Z/E
-
- Solution Forums
- Software Forums
- MCUXpresso Software and ToolsMCUXpresso Software and Tools
- CodeWarriorCodeWarrior
- MQX Software SolutionsMQX Software Solutions
- Model-Based Design Toolbox (MBDT)Model-Based Design Toolbox (MBDT)
- FreeMASTER
- eIQ Machine Learning Software
- Embedded Software and Tools Clinic
- S32 SDK
- S32 Design Studio
- GUI Guider
- Zephyr Project
- Voice Technology
- Application Software Packs
- Secure Provisioning SDK (SPSDK)
- Processor Expert Software
- Generative AI & LLMs
-
- Topics
- Mobile Robotics - Drones and RoversMobile Robotics - Drones and Rovers
- NXP Training ContentNXP Training Content
- University ProgramsUniversity Programs
- Rapid IoT
- NXP Designs
- SafeAssure-Community
- OSS Security & Maintenance
- Using Our Community
-
- Cloud Lab Forums
-
- Knowledge Bases
- ARM Microcontrollers
- i.MX Processors
- Identification and Security
- Model-Based Design Toolbox (MBDT)
- QorIQ Processing Platforms
- S32 Automotive Processing Platform
- Wireless Connectivity
- CodeWarrior
- MCUXpresso Suite of Software and Tools
- MQX Software Solutions
- RFID / NFC
- Advanced Analog
- Neural Processing Units
-
- NXP Tech Blogs
- Home
- :
- QorIQ Processing Platforms
- :
- Layerscape
- :
- Re: ls1028ardb yocto-sdk build problems
ls1028ardb yocto-sdk build problems
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
ls1028ardb yocto-sdk build problems
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
I'm trying to follow the instructions here:
https://github.com/nxp-qoriq/yocto-sdk
to build the OS and SDK images for the LS1028ARDB
It appears that walnascar is the default branch, but the build fails if i use the instructions at the link above.
mkdir yocto-sdk
cd yocto-sdk
repo init -u https://github.com/nxp-qoriq/yocto-sdk -b walnascar
repo sync --force-sync
. ./setup-env -m ls1028ardb
bitbake fsl-image-networking
this fails with 3 errors:
- sysvinit installation errors
- dtc-native compile errors
- util-linux-native compile errors
I've also tried the instructions from this document which fail in a different way even if you work around the incorrect instructions (the specified "ls-image-desktop" does not exist):
https://docs.nxp.com/bundle/UG10081_LLDP_L6.1.55_2.2.0/page/topics/how_to_download_flexbuild.html
I also found the flexbuild option, and followed the instructions here:
https://github.com/nxp/flexbuild
git clone https://github.com/NXP/flexbuild.git
cd flexbuild
make docker
make ls1028ardb_defconfig
make all
this also fails with the error:
W: binfmt_misc not found in /proc/mounts -- not mounted
What are the correct instructions for building the OS image and SDK?
Regards
Matt
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Thanks for the input but the walnascar-lsdk branch fails with similar errors as the walnascar branch i described above.
This is the output for
bitbake -k fsl-image-networking-full
Summary: 4 tasks failed:
~/walnascar-lsdk/sources/poky/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb:do_install
log: ~/walnascar-lsdk/build_ls1028ardb/tmp/work/ls1028ardb-fsl-linux/sysvinit-inittab/2.88dsf/temp/log.do_install.1267212
virtual:native:~/walnascar-lsdk/sources/poky/meta/recipes-core/util-linux/util-linux_2.40.4.bb:do_compile
log: ~/walnascar-lsdk/build_ls1028ardb/tmp/work/x86_64-linux/util-linux-native/2.40.4/temp/log.do_compile.1304034
virtual:native:~/walnascar-lsdk/sources/poky/meta/recipes-kernel/dtc/dtc_1.7.2.bb:do_compile
log: ~/walnascar-lsdk/build_ls1028ardb/tmp/work/x86_64-linux/dtc-native/1.7.2/temp/log.do_compile.1321834
~/walnascar-lsdk/sources/poky/meta/recipes-devtools/flex/flex_2.6.4.bb:do_compile
log: ~/walnascar-lsdk/build_ls1028ardb/tmp/work/aarch64-fsl-linux/flex/2.6.4/temp/log.do_compile.2409352
Summary: There were 17 WARNING messages.
Summary: There were 6 ERROR messages, returning a non-zero exit code.
Regards
Matt
yipingwang
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please install the host packages as the following.
sudo apt-get install build-essential chrpath cpio debianutils diffstat file gawk
gcc git iputils-ping libacl1 liblz4-tool locales python3 python3-git python3-
jinja2 python3-pexpect python3-pip python3-subunit socat texinfo unzip wget xzutils
zstd efitools
If your problem persists, please send the log file ~/walnascar-lsdk/build_ls1028ardb/tmp/work/ls1028ardb-fsl-linux/sysvinit-inittab/2.88dsf/temp/log.do_install.1267212 to me to do investigation.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Thanks for the reply, it turns out it was my fault, I was using the wrong version of ubuntu and stupidly ignored the warning in the yocto output.
I switched to using a 24.04 dev container and following the instructions in:
- Layerscape Software Development Kit User Guide for Yocto: UG10374.pdf
to do the build and that worked fine.
Regards
Matt
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
after posting this, I discovered Debian Linux SDK User Guide which has some pre-requisites not listed in the flexbuild readme.md. This appears to allow me to generate a Debian based image for the LS1028ARDB.
What are the instructions for generating an SDK in a similar way to the Yocto environment? or do you recommend a standard cross-compiler?
Is the Debian solution now the recommended OS for this platform? Yocto feels more appropriate for an embedded system.
Regards
Matt
yipingwang
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Please use the following latest Yocto Linux SDK release.
The release includes both source code and prebuilt images as listed below:
- Source Release files are on https://github.com/nxp-qoriq/yocto-sdk/tree/walnascar-lsdk
Branch: walnascar-lsdk
- Linux BSP Supported boards, Features, Known Issues, please refer to Release Notes
- Layerscape Software Development Kit User Guide for Yocto: UG10374.pdf
- Layerscape Linux SDK User Guide: UG10381.pdf
- The following precompiled images are hosted on https://www.nxp.com/lgfiles/llsdk/walnascar/<package_name>
|
# |
Name |
Description |
|
1 |
boot_ls1028ardb_lts_6.12.tgz |
Bootpartition image for LS1028ARDB |
|
2 |
boot_ls1043ardb_lts_6.12.tgz |
Bootpartition image for LS1043ARDB |
|
3 |
boot_ls1046ardb_lts_6.12.tgz |
Bootpartition image for LS1046ARDB |
|
4 |
boot_lx2160ardb-rev2_lts_6.12.tgz |
Bootpartition image for LX2160ARDB |
|
5 |
firmware_ls1028ardb_uboot_emmcboot.img |
BSP firmware image for LS1028ARDB eMMC boot |
|
6 |
firmware_ls1028ardb_uboot_sdboot.img |
BSP firmware image for LS1028ARDB SD boot |
|
7 |
firmware_ls1028ardb_uboot_xspiboot.img |
BSP firmware image for LS1028ARDB XSPI boot |
|
8 |
firmware_ls1043ardb_uboot_nandboot.img |
BSP firmware image for LS1043ARDB NAND boot |
|
9 |
firmware_ls1043ardb_uboot_norboot.img |
BSP firmware image for LS1043ARDB NOR boot |
|
10 |
firmware_ls1043ardb_uboot_sdboot.img |
BSP firmware image for LS1043ARDB SD boot |
|
11 |
firmware_ls1046ardb_uboot_emmcboot.img |
BSP firmware image for LS1046ARDB eMMC boot |
|
12 |
firmware_ls1046ardb_uboot_qspiboot.img |
BSP firmware image for LS1046ARDB QSPI boot |
|
13 |
firmware_ls1046ardb_uboot_sdboot.img |
BSP firmware image for LS1046ARDB SD boot |
|
14 |
firmware_lx2160ardb-rev2_uboot_emmcboot.img |
BSP firmware image for LX2160ARDB eMMC boot |
|
15 |
firmware_lx2160ardb-rev2_uboot_sdboot.img |
BSP firmware image for LX2160ARDB SD boot |
|
16 |
firmware_lx2160ardb-rev2_uboot_xspiboot.img |
BSP firmware image for LX2160ARDB xSPI boot |
|
17 |
fsl-image-networking-ls1028ardb.rootfs.tar.gz |
Layerscape rootfs supports basic networking functionality on LS1028ARDB |
|
18 |
fsl-image-networking-full-ls1028ardb.rootfs.tar.gz |
Layerscape rootfs supports full networking functionality on LS1028ARDB |
|
19 |
fsl-image-networking-ls1043ardb.rootfs.tar.gz |
Layerscape rootfs supports basic networking functionality on LS1043ARDB |
|
20 |
fsl-image-networking-full-ls1043ardb.rootfs.tar.gz |
Layerscape rootfs supports full networking functionality on LS1043ARDB |
|
21 |
fsl-image-networking-ls1046ardb.rootfs.tar.gz |
Layerscape rootfs supports basic networking functionality on LS1046ARDB |
|
22 |
fsl-image-networking-full-ls1046ardb.rootfs.tar.gz |
Layerscape rootfs supports full networking functionality on LS1046ARDB |
|
23 |
fsl-image-networking-lx2160ardb-rev2.rootfs.tar.gz |
Layerscape rootfs supports basic networking functionality on LX2160ARDB |
|
24 |
fsl-image-networking-full-lx2160ardbrev2.rootfs.tar.gz |
Layerscape rootfs supports full networking functionality on LX2160ARDB |
|
25 |
flex-installer |
Deploy tools |
Please refer to the User Guide document for the detailed steps of image deployment.
You also could use Debian flexbuilder Linux SDK to use Debian Linux OS.
