Aquantia AQR105B1EG

[pedro_f]

Hello All,

I am doing a PCB design based on the reference design for the LaserScape LS1043 eval board (Layerscape LS1043A Reference Design Board | NXP ). I am having trouble locating, among others, the 10G phy, the Aquantia AQR105B1EG device. I was wondering if there was a way for you guys to point me out where to buy it.

Thanks everybody.

Best regards,

Pedro

[bpe]

AQR105 is not available from NXP because it is not an NXP product.
It is a relatively popular device, a google search returns several
offers on the first page. So the suggestion is, contact a distributor
in your region for this part availability.

Have a great day,
Platon

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[pedrofergar]

Thanks Platon for your reply.

Please, would you share some of your google search links? Unfortunately, everything I get has no stock available.

Thanks!

Best regards,

Pedro

[bpe]

When I was doing the search, I did not check any distributor/site for
the actual stock availability or possible shipment dates. Besides that,
Google search is specific to the region, so what I see may not be appropriate for
your location/country. I suggest discussing this with your local distributor.

Again, this is _not_an NXP part, NXP Technical Support cannot advise
anything besides the options have already been discussed.

Have a great day,
Platon

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------