Dear nxp community,
i was testing LPC55s16-EVK for the secure boot features as follows and everything worked well as expected but in the i ended up with non-responsive baord.
I created a workspace for secure provisioning tool and
- generated a plain signed image from my built elf file, and flashed it. Application was running.
- Then in cmpa flash region i setup debug authentication for, with debug credentials and it worked as well.
- Then i created another test workspace and generated new ROTK and Image keys to sign the same elf file, in order to test ROM bootloader will reject this firmware as it has different hash stored in cmpa region.
- In the new work space i did not change anything in cmpa region, it used default settings, that in my opinion are with debug port enabled, but i ended up with non responsive device,
- In both case the life cycle was selected as development not sealed.
- nxpdebugmbox responds with timeout error.
- when i try to bring the device in ISP mode by holding ISP pin low and pressing and releasing the reset pin then i cannot get any response of ping from BLHost tool.
- I tried to use SPI and USB interfaces as well but the result is the same.
- i am attaching the cmpa.json file and the logfile of my 2nd workspace that is test workspace for the reference.
Is there a way, how can recover this device? Any help will be much appreciated. Thanks