LPC55 PLU tool

[_Ferrari_]

Dear all,

I'm developing a project using LPC55xx processor and I have to use the PLU feature of the processor.

I'm using MCUXpresso IDE v11.6.1 [Build 8255] [2022-10-03] to develope the project and I selected the Peripherals configuration to configure PLU.

I selected the PLU tabs and I copy the link (https://www.nxp.com/mcu-plu-config-tool) suggested by MCUXpresso to download the proper tool.

Unfortunately the requested page (https://www.nxp.com/mcu-plu-config-tool) is not found in your site.

Did you have similar problem ?

How did you fix it ?

Thank you for your help and cooperation

best regards

[RaRo]

Hello @_Ferrari_,

Please follow the next steps to access the PLU Configuration Tool in MCUXpresso IDE:

1. Download MCUXpresso IDE v11.7.0, this is because PLU Tool in MCUXpresso IDE v11.6.1 is not working properly.
2. Download the LPC55xx appropriate SDKv2.13.
3. Create a new project or import an SDK example.
4. Open ConfigTools -> Peripherals.
5. Then, in Components section, go to Register initialization.

RaulRomero_0-1674850092817.png

5. A new window will open, please select PLU

RaulRomero_1-1674850092820.png

6. Now the Peripherals window should look as below:

RaulRomero_2-1674850092821.png

    Click on the Open Schematic View.

7. Finally, go ahead and create your schematic.

RaulRomero_3-1674850092824.png

Best regards, Raul.