Getting started with LPC1778FBD208

aus_swsol · ‎01-09-2025

Hi Expert,

Im using LPC1778FBD208 with 208 pin numbers. Im using pin 59 to blink LED.

Currenlty using Keil IDE and managed to works on GD32 MCU. Can you guide me how to build in project for LPC in Keil. Im very appreciate if you can share me the full project sdk. I just need to open, build & flash. Im using CMSIS-DAP to flash the code.

Thanks in advanced.

Harry_Zhang · ‎01-21-2025

Hi @aus_swsol

Sorry, we have reported the download issue to our website team and will resolve it as soon as possible so that you can download the resources.

BR

Harry

View solution in original post

Harry_Zhang · ‎01-10-2025

Hi @aus_swsol

You can access to the NXP lpcopen website

LPCOpen Software for LPC17XX | NXP Semiconductors

And download the lpc1788 Keil packet.

You can modify the project according to your needs based on this Keil project.

BR

Harry

aus_swsol · ‎01-10-2025

*additional reply

other problem:-

1) the LED to blink also was wrong. below is my code, but the LED that blink is at P2[27] which is pin 47. i want to blink led at P2[18] which is pin 59.

2) i need to enter debug mode, run debug mode. then exit the debug mode to make it run. why? if i reset power, the board doesnt blink pin 47.

thanks in advanced

aus_swsol · ‎01-10-2025

Hi Harry,

This is what happened when I clicked

Can you please provide me the latest stable SDK with example for LPC1778FBD208?

Im using Keil. currently my solution is using the library from this github. Im not sure this is official stable version or not.
https://github.com/openxc/nxp-cdl/tree/master

Lib I used was from these two folder and managed to blink the LED.

CMSISv2p00_LPC177x_8x

LPC177x_8xLib

However, I need a full example for these library to fast plot my project.

Thanks in advanced