Accurate dimensional info of LPC-Link2?

[leonardp]

Is there accurate dimensional information on all the connectors and mounting holes of the LPC-Link 2 board? The PDF currently present at Embedded Artists (https://www.embeddedartists.com/wp-content/uploads/2018/06/LPC-Link-II_v3_header_dimensions.pdf ) fails to indicate the location of J1, J6, JP1, JP2, JP3, the second mounting hole and all the testpoints...

[leonardp]

Since no-one helped I had to make my own by massaging several documents and measuring the real thing :smileysad:

For those who might need it, I attached the file.

[jeremyzhou]

Hi ,

Thanks for your sharing.:smileyhappy:

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

[jeremyzhou]

Hi leo potjewijd,
Thank you for your interest in NXP Semiconductor products and
for the opportunity to serve you.
Unfortunately, we don't have other files about the dimensional information except for the (

https://www.embeddedartists.com/wp-content/uploads/2018/06/LPC-Link-II_v3_header_dimensions.pd

)

Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------