LPC804: PLU Hands-on Lab Guide

cancel
Showing results for 
Search instead for 
Did you mean: 

LPC804: PLU Hands-on Lab Guide

No ratings

LPC804: PLU Hands-on Lab Guide

pastedImage_13.png

Hello Community!


This document is provided as a hands-on lab guide.  The intent of the lab is to demonstrate how to program the LPCXpresso804 board with the MCUXpresso IDE making use of the SDK examples and the PLU module drivers.

The PLU configuration tool will be used to create a new schematic design that will be programmed to the PLU.

Setup
The following items need to be installed on your computer to complete the lab:

Software:

•    SDK_2.4.1_LPCXpresso804:

-    Copy link into browser: https://mcuxpresso.nxp.com/en/select?device=LPCXpresso804

-    Select ‘MCUXpresso IDE’ or ‘All Toolchains’ in the Toolchain IDE drop-down
-    Select ‘Download SDK’

•    MCUXpresso IDE version 10.2.1:

-    Can be installed at following link: https://www.nxp.com/mcuxpresso/ide

•    PLU configuration tool

-    Can be installed at this link: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-appl...


 
Hardware:


•    LPCXpresso804 Development Board (OM40001): https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/...

•    PLU Shield Board


•    1 Micro USB cable

Hope this guide is helpful! Any comments are welcome.

Best Regards,
Carlos Mendoza
Technical Support Engineer

Labels (2)
Attachments
Version history
Revision #:
1 of 1
Last update:
‎11-15-2018 02:03 PM
Updated by: