LPC LINK 2 debugger

[Teja114]

Hi there,

Greetings!!!

i'am saiteja currently working with ke06z microcontroller, previously we used PE Micro debugger ,

now we changed to LPC LINK 2 debugger we are unable to program KE06Z micro controller with LPC LINK 2 debugger, kindly help us for debugger settings in Kinetis IDE 

[Omar_Anguiano]

Hello!

Hope you are well. My name is Omar and I will gladly help you with this.
I suggest you install CMSIS-DAP firmware into your board, you can find it at this link: https://www.nxp.com/design/software/development-software/sensor-toolbox-sensor-development-ecosystem...

Also, please program the LPC-Link2 with CMSIS-DAP, this can be done with LPCScrypt: https://www.nxp.com/design/microcontrollers-developer-resources/lpc-microcontroller-utilities/lpcscr...
You can find more detailed information about using the LPC-Link2 in chapter 19.9 of the MCUXpresso User Guide: https://www.nxp.com/docs/en/user-guide/MCUXpresso_IDE_User_Guide.pdf

Let me know if this is helpful, if you have more questions do not hesitate to ask me.
Best regards,
Omar