KDS path not set

[JiaAn]

I am running KDS3.3.0. And when I press debug. There's an error:

I am using Windows 10 (x64) and debugging MKL17Z256 with USBDM. I did check that USBDM can program MCU without any error message. But what I need is to use KDS to debug my code. Can anyone tell me how to fix this problem? Thanks.

[ErichStyger]

Your command line shows spaces in the command for the executable, this is probably the issue. Otherwise I recommend to consult the USBDM forum/user group?

[JiaAn]

I accidentally find out that I do not have C:\Freescale\KSDK

But I already install it.

Could this be a problem? If so, how should I fix this?

[ErichStyger]

no, your problem is that it cannot find the gdb for USBDM, so the path to the gdb is wrong.

[JiaAn]

Okay, but I just figure out that I got another problem.

A project can build on another computer. But on mine, it will show errors.

Do you know what might cause this? I can't even build the project.

[ErichStyger]

Check the build tools output in the Eclipse console view.

[ErichStyger]

Check your launch configuration: it seems to me that you don't have correctly configured the path to USBDM.

I hope this helps,

Erich

[JiaAn]

This is my first time using KDS and USBDM. I need more details to help.

Can you tell me where should I found the launch configuration? Thank you.

[ErichStyger]

Menu Run > Run Configurations shows all launch configurations.

[JiaAn]

I checked the settings. And seems nothing wrong there.

I attached the screenshots in case there're some settings incorrect but I didn't find out.