Flash as EEPROM with MKL14Z64VFM4

[andreacresta]

Dear all,

We need to "save" some post-programming parameters and therefore we would like to be able to use part of the Flash memory as if it were an EEprom.

I can't find any documentation or examples, can you point me to something to help me ?

Thanks in advance.

Best regards,
Andrea

[mjbcswitzerland · Accepted solution]

Hi Andrea

See the parameter system in http://www.utasker.com/docs/uTasker/uTaskerFileSystem_3.PDF
The code for this in in the free open source uTasker project on Github and is compatible with KL14, plus also allows you to simulate the chip and the internal flash operations.

Regards

Mark

Kinetis: http://www.utasker.com/kinetis.html
Kinetis KL25, KL26, KL27, KL28, KL82, KL43, KL46
- http://http://www.utasker.com/kinetis/FRDM-KL25Z.html
- http://www.utasker.com/kinetis/TWR-KL25Z48M.html
- http://www.utasker.com/kinetis/FRDM-KL26Z.html
- http://www.utasker.com/kinetis/TEENSY_LC.html
- http://www.utasker.com/kinetis/FRDM-KL27Z.html
- http://www.utasker.com/kinetis/Capuccino-KL27.html
- http://www.utasker.com/kinetis/FRDM-KL28Z.html
- http://www.utasker.com/kinetis/FRDM-KL82Z.html
- http://www.utasker.com/kinetis/FRDM-KL43Z.html
- http://www.utasker.com/kinetis/TWR-KL43Z48M.html
- http://www.utasker.com/kinetis/FRDM-KL46Z.html
- http://www.utasker.com/kinetis/TWR-KL46Z48M.html

For less questions and faster, cheaper developments: try uTasker for Kinetis

[andreacresta]

Dear Mark,

thank you for the help.

Best regards,
Andrea