FRDM-IMX93 Hardware Introduction

Yes

FRDM-IMX93 development boards are the first FRDM development board with i.MX MPUs and include Wi-Fi and Bluetooth modules and support for Debian, Yocto and GoPoint which will help you to develop your industrial and IoT applications quickly with NXP's developer experience.

FRDM-IMX93 Applications

Low-cost development board usage, Bi-annual BSP release for Debian

Yearly BSP release for Yocto.

Get to know FRDM-IMX 93 Development Board

Specifications

2x Arm Cortex®-A55 + Cortex®-M33
Wi-Fi 6 + BT + 802.15.4 Module on-board, IW612
2x GB Ethernet (1xETER, 1xTSN)
MIPI-CSI/DSI, HDMI
M.2 Connector
LPDDR4X 16-bit 2GB
eMMC 5.1, 32GB
MicroSD 3.0 card slot
3x USB 2.0 Type-C connector (one for Debug, one PD only) + 1x USB 2.0 Type-A
RTC, Buttons and LED

Feature	FRDM-IMX93
eMMC	32GB
DRAM	Micron 2GB
PMIC	PCA9451A
WiFi Module	u-blox MAYA-W276 on-board
USB TYPE C	Type-C+Type-A
ENET	2xGbE
M.2 (Key E) SDIO WiFi / BT	Y (rework needed)
HDMI	IT6263/Y
MIPI DSI Panel	22 Pins FPC HDR
LVDS Panel	N
MIPI CSI camera	22 Pins FPC HDR
2x20 Expansion Interface	Y
CAN BUS	Y
MicroSD	Y
UART	Y
Audio	MQS
Remote Debug	N
NXP Connector (CAN,ADC, I2C)	Y
Power Connector	Type-C
PCB layers	10
Base Board DIM	6.5x10.5cm

NXP Devices On-Board
PMIC	PCA9451A
USB PD TCPC PHY IC	PTN5110
High-Voltage USB PD Power Switch	NX20P5090UK
IIC Extends GPIO	PCAL6524/PCAL6408A
CAN Transceiver	TJA1051T/3
USB Sink & Source combo power switch	NX20P3483UK
USB Type-C CC and SBU Protection IC	NX20P0407
Real-time clock/calendar	PCF2131
Wi-Fi, BT, 802.15.4 Tri-Radio	IW612 (in u-blox Module)