MPXV7002GC6U does not display pressure value

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 

MPXV7002GC6U does not display pressure value

2,072 次查看
gloriachen
Contributor I

We bought the part of MPXV7002GC6U with date code of 1850, there are many parts not display pressure value. Pls check the picture for details.

Can we send some parts to have FAE?

Looking forward to your reply. thank you.

0 项奖励
回复
1 回复

1,762 次查看
TomasVaverka
NXP TechSupport
NXP TechSupport

Hi Gloria,

It is unfortunate to hear about such an issue, I do have a few questions to let us start:

1. How many parts have you tested in total so far and on how many of them have you seen this problem?

2. What exactly does the first picture represent?

3. Have you tried to desolder "faulty" parts from your PCB and use a multimeter to check their output? 

4. Does it happen right after powering-up the board or later during the use?

5. How were the parts soldered on a PCB?

6. What is the complete marking found on the top side of tested parts?

7. Were they purchased directly from us or from an authorized distributor?

Best regards,

Tomas

0 项奖励
回复