Hi
After i plug in USB-KW38 and install "MCUXpresso IDE", the computer still could not detect and install "KINETIS VIRTUAL COM" driver.
Could you provide the driver?
TKs
Jay
Solved! Go to Solution.
Hi Jay, I hope you're doing well!
Could you please take a look at the Getting Started with USB-KW38 guide here?
It includes step by step instructions and links to the necessary drivers and information to begin using the USB-KW38 as both a protocol sniffer, or a Development Kit.
The OpenSDA releases for this board can be downloaded from the following page of our website:
OpenSDA Serial and Debug Adapter | NXP
Currently, you can download OpenSDA version 2.2 with DAPLink Bootloader by selecting the USB-KW38 from the drop-down list. Drivers for CMSIS-DAP can also be downloaded from this same page, on section 3, after selecting the USB-KW38 from the list.
Please let me know if you need any more information.
Take care, best regards,
Sebastian
Hi Jay, I hope you're doing well!
Could you please take a look at the Getting Started with USB-KW38 guide here?
It includes step by step instructions and links to the necessary drivers and information to begin using the USB-KW38 as both a protocol sniffer, or a Development Kit.
The OpenSDA releases for this board can be downloaded from the following page of our website:
OpenSDA Serial and Debug Adapter | NXP
Currently, you can download OpenSDA version 2.2 with DAPLink Bootloader by selecting the USB-KW38 from the drop-down list. Drivers for CMSIS-DAP can also be downloaded from this same page, on section 3, after selecting the USB-KW38 from the list.
Please let me know if you need any more information.
Take care, best regards,
Sebastian