Peter Wang

Rapid IoT Studio project example: Smart Locker

Discussion created by Peter Wang Employee on Nov 2, 2018

Attachments are :

  • Video about the project
    • Rapid IoT Studio project example: smartlocker_20181022.mp4
  • Source code and binary
    • SmartLocker firmware_20190227.bin
    • SmartLocker_20190227.atmo
    • SmartLocker


Project introduction:

The Smartlocker is a locker that could open or close the door using phone App. Control message send to the Rapid IoT Kit usin BLE, then the Kit will open or close the door according to control command. There is a highlight security feature that if the door is broken into, then the Kit will send warnning message to the phone App.