git.freescale.com down?

[daveschiopucie]

Trying to sync to git.freescale.com, getting "Unable to connect go git.freescale.com".

Did something change?

DS

[dhananjay_chauh]

I am facing this issue now.

USING REPO INIT:

repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-4.1-krogoth

manifests:
fatal: unable to connect to git.freescale.com:
git.freescale.com[0: 192.88.156.202]: errno=Connection refused

Is there an issue with the server? I am facing this issue from 29/02/2020.

[fsiegel]

I'm having troubles cloning linux-imx specifically imx_4.1.15_2.0.0_ga.

Running bitbake I get:

fatal: The remote end hung up unexpectedly
fatal: early EOF
fatal: index-pack failed

ERROR: linux-imx-4.1.15-r0 do_fetch: Function failed: Fetcher failure for URL: 'git://git.freescale.com/imx/linux-imx.git;protocol=git;branch=imx_4.1.15_2.0.0_ga'. Unable to fetch URL from any source.

after some time or:

fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.

ERROR: linux-imx-4.1.15-r0 do_fetch: Function failed: Fetcher failure for URL: 'git://git.freescale.com/imx/linux-imx.git;protocol=git;branch=imx_4.1.15_2.0.0_ga'. Unable to fetch URL from any source.

when it fails immediately.

Cloning manually also fails with either early end of file or could not read.

Didn't work yesterday either, but used to last week.

U-Boot do_fetch() completed on the second attempt.

Cloning from Github works fine so I guess the freescale repository is having hickups again.

(A Mirror would be great for this case)

[Danube]

Hi ,

I  try more than 5 times and download finish.

(Command  : bitbake -c fetchall linux-imx)

[keestrommel]

Today having the same problem.

Because this is a re-occurring issue a mirror would very helpful.

[tomfoy]

I've advised our local NXP rep, but no real response yet, like ETA etc...

[chetkaufman]

Hi, we are working internally to get this resolved.   The GIT managers are aware of the issue and we are working to find the root cause and solution.  In the meantime, you can navigate to the GIT website and download packages from there.   We hope to have it resolved soon.  

[chetkaufman]

Hi all, I was told that our GIT repository is fixed now and cloning should work.   Please post on this thread if you are still seeing issues so I can alert the team that more work is needed.  

[cyrilstrejc]

I think the following git clone used to work, but not anymore...

$ git clone git://git.freescale.com/ppc/sdk/usdpaa/usdpaa-apps.git

Cloning into 'usdpaa-apps'...
fatal: unable to connect to git.freescale.com:
git.freescale.com[0: 192.88.156.202]: errno=Connection refused
‍‍‍‍‍

[jonathanwebster]

This works for me now:-

$ repo init -u git://git.freescale.com/imx/fsl-arm-yocto-bsp.git -b imx-4.1-krogoth

[cyrilstrejc]

Yes, even that my git clone works now. The Freescale's git repo seems to be OK completely.

[rowangifford]

Any replys from NXP? Are they aware of the issue?

[jedrumh75]

No replies that I noticed. I tried sharing this post to hopefully gain exposure. You could also try doing the same. 

[jonathanwebster]

I've not seen any responses from NXP.

How do we prompt them?

[alexanderchubuc]

I get the same error

[jedrumh75]

I'm also experiencing the same issue. Have been since May 6, 2017

[rowangifford]

Also getting either connection refused or timeout

[tomfoy]

I am also experiencing this problem today.

[jonathanwebster]

That could be what I'm seeing as well!

https://community.nxp.com/thread/450783