Notes when chang from MX6 Solo to Quad

[george]

Dear All,

We already manufactured the product using i.MX6Solo.

However, performance lacks for new application.

We wish to change CPU to Quad from Solo.

We are going to change CPU to Quad from Solo with reference to http://cache.freescale.com/files/32bit/doc/app_note/AN4397.pdf.

Isn't there any point which we other than AN4397 must be careful of ?

For example, around of PMIC(MMPF0100F0EP) etc.

Please let us know if there's anything which catches your attention.

Best Regards,

George

[igorpadykov · Accepted solution]

Hi George

except  AN4397 it may be useful to look at

http://cache.freescale.com/files/32bit/doc/eng_bulletin/EB814.pdf

HW Design Checking List for i.MX6DQSDL

Best regards

igor

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

[george]

Dear Igor,

Thank you for always replying.

Thnaks,

George