Isolcpus for LX2160

[ranga_yn]

Hello NXP team,

For LX2160 LSDK 1909 i want to isolate all the 16 cores with image in the SD card .hence i am running the below command in UBoot promt

setenv othbootargs isolcpus=1-15

saveenv

qixis_reset altbank

when the SD boot happen i could see the cat /proc/cmdline shows 1-7 isolation.

could you please help with the isolation for 16 cores separately.

regards,

ranga

[ufedor]

Please execute the same commands in U-Boot after booting from alternative bank.