最近在使用imx6sx sdb板,BSP版本为4.1.15,按照《i.MX_Linux_Reference_Manual》的要求,做如下配置:
系统运行后,执行lspci,没有任何内容出现,请问在IMX6SX中如何配置和加载PCIE驱动
我是fpga模拟出的pcie设备,使用3.14.52版本的内核可以,但是3.14.52和4.1.15的架构差的比较多,不知道从何分析
发自网易邮箱大师
在2016年10月27日 16:45,jimmychan 写道:
|
|
NXP Community
|
|
Re: IMX6SX PCIE 驱动问题
reply from jimmychan in i.MX Community - View the full discussion
which PCIe device are you connected to?
Reply to this message by replying to this email, or go to the message on NXP Community |
Start a new discussion in i.MX Community by email or at NXP Community |
Following Re: IMX6SX PCIE 驱动问题 in these streams: Inbox |
This email was sent by NXP Community because you are a registered user.
You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences
|
|