IMX6QP serial download bootmode problem

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

IMX6QP serial download bootmode problem

514 Views
longyun
Contributor I

I made a board based on sabre sd. when use mfgtools to boot from serial download mode, i find it's difficult to boot sucess, almost 1 times  a day.there is no freescale USB HID device appear in xp device management  when failed to boot. And i have passed DDR STRESS Test and generate a uboot. I have burn uboot zImage and rootfs to eMMc and boot success from  Internal rom mode.

问下IMX6QP usb serial download mode 失败的原因,原来下载过镜像 但是是通过引导到uboot 然后手动烧着到eMMc 现在要把mfgtool完整脚本完成,电脑上没有检测到USB设备,前两天也就检测到了一两次

Labels (1)
0 Kudos
1 Reply

384 Views
Rita_Wang
NXP TechSupport
NXP TechSupport

It maybe caused by your hardware design, here you can create a Support Requests send your schematic to our in our website

Support|NXP. 

0 Kudos