iWave announces i.MX6UL SODIMM Module

[#1]

iWave's i.MX6 UltraLite (i.MX6UL) based SODIMM CPU module integrates power efficient high performance ARM Cortex A7 CPU core operating up to 528MHz speed. iMX6 UL SOM is ultra-compact in size and integrated with on-board PMIC, Flash, DDR3 and dual Ethernet PHY. The SOM is ideally suitable for the cost & power optimized general embedded and industrial applications.

                                                                                                                                       i.MX6UL SODIMM Development Kit

   i.MX6UL SODIMM SOM                                                                                                                                                                                                                                                                                                

Benefits:

• Ultra-compact form factor module with size of 67.6mm x 29mm
• Long term support: 7+ years
• Technical & Quick customization support
• Compatible with ARM Cortex A9 i.MX6 Q/D/S SODIMM SOM

Highlights:

• Power efficient ARM Cortex-A7 @ 528MHz
• Advanced hardware enabled security
• PMIC with DVFS support
• Industrial temperature support available 

Features:

• CPU:
  • Freescale’s i.MX6UL1/2/3 @ 528MHz
  • ARM Cortex A7
• PMIC:
  • Freescale PF3000
• Memory:
  • 256MB DDR3 RAM(Expandable)
  • 256MB NAND Flash (Expandable)
  • MicroSD Slot (Optional)¹
  • eMMC Flash (Optional)¹
  • QSPI Flash (Optional)¹
• Communication:
  • 10/100 Ethernet PHY – 2 Ports
• SODIMM Edge Interfaces:
  • Debug UART
  • Data UART – 2 Ports
  • CAN – 2 Ports
  • SD(4-Bit) – 1 Port
  • 10/100 Ethernet – Up to 2 Ports²
  • USB OTG – 2 Ports
  • 24bpp RGB display port
  • 8-Bit Parallel Camera Port
  • I2S Audio or JTAG
  • I2C x 1 Port
  • PWM
  • GPIOs
• OS Support:
  • Linux 3.14.28
• Power Supply:
  • 3.3V @ 1A through SODIMM edge

Note 1: At a time either NAND Flash or eMMC & QSPI flash or uSD & QSPI flash can be used in the SOM. By default NAND Flash is supported.

Note 2: If 2^nd Ethernet (ENET2) not used, it can be used as additional 3 UARTs or Key pad 4x4 or RMII interface.

Target Applications:

• Industrial HMI & Access Control
• Energy management & IOT gateway
• Industrial control & automation
• White goods & Smart appliances
• Medical & Healthcare equipments
• Mobile POS & Secure e-commerces

To send us an enquiry on this product, please click here Enquiry Form

To get more details on this product, please write us on [email protected]