JN-UG-3115 has mistake

[chen217800]

page of 171 it said "u8AlarmMaskis an optional bitmap indicating the general alarms that can be generated (Bit 0 - general software alarm, Bit 1 - general hardware alarm)",but in ZigBee Cluster Library Specification it said like this"3.2.2.2.12   AlarmMask   Attribute The  AlarmMask  attribute is 8 bits in length and specifies which of a number of general alarms MAY be generated, as listed in Table 3-11. A ‘1’ in each bit position enables the associated alarm.
Table 3-11. Values of the AlarmMask Attribute
Attribute Bit Number  Alarm Code  Alarm
0  0  General hardware fault
1  1  General software fault

[Sebastian_Del_Rio]

Hi Chenyk,

Just to update you on this topic, we checked the information in the document with the corresponding information from Zigbee Alliance, and found that it was incorrect. We are going to correct the document, but the software works should work the way the ZigBee Cluster Library Specification specifies.

Thank you for your feedback.

Best regards,

Sebastian

[Sebastian_Del_Rio]

Hi Chenyk Chen, I Hope you're doing well!

Thank you for your feedback, we are taking a look at this and will update documentation accordingly.

Best regards,

Sebastian