Hi NXP Support Team,
I am having a T2080 processor card and trying to boot from eSPI flash.
Configured the board to boot from Hardcoded boot mode and through Code warrior tool target tasks flash programmer window programmed and verified my RCW and u-boot contents into flash successfully.
Next Configured the board to boot from eSPI mode and found uboot to be getting hang. Below are the prints obtained on the serial terminal.
Please confirm you have done DDR validation with QCVS DDR.
Hi @June_Lu ,
We have done DDR validation with QCVS DDR tool by referring to the QCVS_DDR_User_Guide document.
Thanks,
Arathi