T1042 Device RGMII

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

T1042 Device RGMII

929 Views
vishwadeep_ns
Contributor I

Dear Concern,

We are working on  NXP T1042 PowerPC Module located on a custom baseboard. 

Both module and baseboard are new designs. Here we are facing an issue with RGMII ports issue. (EC1: fm1-mac3 & EC2:fm1-mac4). 

We are using DP83867 PHY.

Attached log file.

Need support ASAP.

Thank you

0 Kudos
8 Replies

707 Views
vishwadeep_ns
Contributor I

Hi ufedor,

PFA for DTS file.
EC1 PHY address : 00001110b (0e)
EC2 PHY address : 00000101b (05)
PHY : DP83867

Thank you

0 Kudos

707 Views
ufedor
NXP Employee
NXP Employee

Please check that you are able to access the RGMII PHY's registers in U-Boot.

In the described case it is convenient to create a Technical Case:

1)    open www.nxp.com
2)    Select "Support" -> "All Support Options"
3)    Click "Go to Tickets"
4)    Log in with your NXP login and password
5)    On the "Group, Create and View your support cases" page press "+ Add a new case" to start the process.

0 Kudos

707 Views
ufedor
NXP Employee
NXP Employee

Please provide the DTS being used for inspection.

0 Kudos

707 Views
vishwadeep_ns
Contributor I

Hi ufedor,

PFA for your information.

Let me know your suggestions.

Thanks for your support.

0 Kudos

707 Views
ufedor
NXP Employee
NXP Employee

The request was to provide Device Tree Source (DTS) file.

Please also provide the processor's connection schematics for inspection as searchable PDF and explain which addresses were projected for each PHY.

0 Kudos

707 Views
vishwadeep_ns
Contributor I

Hi ufedor,

Could you please provide your mail id.

We will share it to your mail.

Thank you.

0 Kudos

707 Views
vinothkumars
Senior Contributor IV

Hi  vishwadeep.ns@tridentinfosol.com‌,

Please check the phy address of your dts file. First you will debug with u-boot itself (check u-boot configuration file for phy address provided right or wrong?)

Thanks & Regards,

VinothS.

Regards,
Vinothkumar Sekar
0 Kudos

707 Views
vishwadeep_ns
Contributor I

Hi Vinoth S,

I am new to this T1042.

How can i see the dts file.

How to check the phy address in dts file

Could you please let me know the some more information how to check in

dts file.

Thanks for your help.

0 Kudos