Dear Concern,
We are working on NXP T1042 PowerPC Module located on a custom baseboard.
Both module and baseboard are new designs. Here we are facing an issue with RGMII ports issue. (EC1: fm1-mac3 & EC2:fm1-mac4).
We are using DP83867 PHY.
Attached log file.
Need support ASAP.
Thank you
Please check that you are able to access the RGMII PHY's registers in U-Boot.
In the described case it is convenient to create a Technical Case:
1) open www.nxp.com
2) Select "Support" -> "All Support Options"
3) Click "Go to Tickets"
4) Log in with your NXP login and password
5) On the "Group, Create and View your support cases" page press "+ Add a new case" to start the process.
Please provide the DTS being used for inspection.
The request was to provide Device Tree Source (DTS) file.
Please also provide the processor's connection schematics for inspection as searchable PDF and explain which addresses were projected for each PHY.
Hi ufedor,
Could you please provide your mail id.
We will share it to your mail.
Thank you.
Hi vishwadeep.ns@tridentinfosol.com,
Please check the phy address of your dts file. First you will debug with u-boot itself (check u-boot configuration file for phy address provided right or wrong?)
Thanks & Regards,
VinothS.
Hi Vinoth S,
I am new to this T1042.
How can i see the dts file.
How to check the phy address in dts file
Could you please let me know the some more information how to check in
dts file.
Thanks for your help.