Hi @Prateeksha_Jain
Questions 1 and 2 are addressed in the S32K3xx Reference Manual, Rev. 12. The manual states that when the major iteration count is exhausted, the eDMA performs several end-of-major-loop operations, including the final source and destination address adjustments and reloading the BITER value into CITER.
Regarding Question 3, there is no dedicated configuration bit that allows CITER to remain at zero once the major loop has completed. The reload of CITER from BITER is part of the eDMA hardware state machine and is performed automatically.
However, if your goal is to stop the channel from servicing additional DMA requests after the major loop completes, you may want to look into using the DREQ bit. This scenario has been previously discussed in the thread How to prevent eDMA TCDn_CITER from auto reloading TCDn_BITER.
BR, VaneB