S32K3 eMIOS PWM disable output source can not choose?

[PINKMAN]

hello,experts:

i noticed that eMIOS pwm surport disable it's output using it's disable inputs  via trgmux,but in  configration i can't choose its source ,can you tell me why?

[Senlent · Accepted solution]

Hi@PINKMAN

yes, this feature is not available till now.

This is from SE team feedback from this topic.

"At the moment, RTD driver didn't support "Output Disable Source" on both S32DS and EB Tresos."

[PINKMAN]

thanks, actually, i must confrim that , if this funtion not support in chip hardware or not support in config tool (PE OR EB),  can  i set the register by munual code to  fill my requriment?

[Senlent]

Hi@PINKMAN

Yes, you can take a look at ODISSL and ODIS bit in datasheet.

Also you can take a look at below two API.

For example:

Set bits "ODIS":
"Emios_Pwm_Ip_SetOutDisable(IP_EMIOS_0_BASE, CHANNEL_4, TRUE)"

Set bits "ODISSL":
"Emios_Pwm_Ip_SetOutDisableSource(IP_EMIOS_0_BASE,CHANNEL_4,0x01)"

[PINKMAN]

ok, i modify the struct  Emios_Pwm_Ip_ChannelConfigType element Emios_Pwm_Ip_OutDisableSourceType directly

thanks