Driver for MC33HB2000 to be used for S32K34

取消
显示结果 
显示  仅  | 搜索替代 
您的意思是: 
已解决

Driver for MC33HB2000 to be used for S32K34

跳至解决方案
784 次查看
HemantK
Contributor III

Hello, 

 

We have a dev board which has S32K3 controller and H-Bridge power IC (MC33HB2000 ).

I didn't find any driver for this chip and was wondering if someone has written or come across a driver for the same.

 

Kind Regards, 

Hemant Kapoor

标记 (3)
0 项奖励
回复
1 解答
769 次查看
lukaszadrapa
NXP TechSupport
NXP TechSupport

Hi Hemant,

there's only "SPI H-Bridge SDK SW package" available directly on MC33HB2000 page:

https://www.nxp.com/design/analog-expert-software-and-tools/configuration-and-system-evaluation-anal...

It's layered software, so it should be relatively easy to port it on different device (originally it's written for some Kinetis devices).

Unfortunately I'm not aware of other software.

Regards,

Lukas

在原帖中查看解决方案

0 项奖励
回复
2 回复数
770 次查看
lukaszadrapa
NXP TechSupport
NXP TechSupport

Hi Hemant,

there's only "SPI H-Bridge SDK SW package" available directly on MC33HB2000 page:

https://www.nxp.com/design/analog-expert-software-and-tools/configuration-and-system-evaluation-anal...

It's layered software, so it should be relatively easy to port it on different device (originally it's written for some Kinetis devices).

Unfortunately I'm not aware of other software.

Regards,

Lukas

0 项奖励
回复
764 次查看
HemantK
Contributor III
Hello Lukas,

Thanks for the response. I will have a look and integrate it in our project.
0 项奖励
回复