PT2000

[yangjiejt]

Hi we are working on some devleopment using PT2000 as injection and fuel pump driver. We learn from some online training video that PT2000 is capable of detecting end of injection current such that provide diagnosis functionality. But when we went through the datasheet, we could not find such features. Could you please share with us some material or demo on this? thanks!

BR

Jie

[TomasVaverka]

Hi Jie,

There is a separate application note for the End of Injection functionality. It is located here: 

https://www.nxp.com/webapp/Download?colCode=AN5071&appType=moderatedWithoutFAE

Let me know if there any other questions.

Best regards,

Tomas

[yangjiejt]

Hi Tomas，

Thanks for your help! I tried the link and found it required approval from NXP. My applicaiton 5 days ago has not been approved yet. Does it usually takes few days to get this application done or should I contact local NXP staff to provide more my information to get this finished? Thanks in advance!

best regards,

Jie

AN5071, MC33PT2000 End of Injection Detection - Application Note

Processing Request

Our records indicate you requested approval to download this item on April 18, 2019 at 04:33 PM. You will be notified by an email when your request has been processed.

在2019年04月19 01时49分, "TomasVaverka"<admin@community.nxp.com>写道:

|

|

NXP Community

|

|

Re: PT2000

reply from Tomas Vaverka in MCUXpresso Software and Tools - View the full discussion

Hi Jie,

There is a separate application note for the End of Injection functionality. It is located here:

https://www.nxp.com/webapp/Download?colCode=AN5071&appType=moderatedWithoutFAE

Let me know if there any other questions.

Best regards,

Tomas

Reply to this message by replying to this email, or go to the message on NXP Community

Start a new discussion in MCUXpresso Software and Tools by email or at NXP Community

Following Re: PT2000 in these streams: Inbox

This email was sent by NXP Community because you are a registered user.

You may unsubscribe instantly from NXP Community, or adjust email frequency in your email preferences

[TomasVaverka]

Hi Jie,

You may also request an access via DocStore. You need to register (see the attached document) and then you will be able to download it from the following website:

https://www.docstore.nxp.com/products?path=/content/docstore/product-hierarchy/Power-train-and-elect...

Please note that usually also an NDA is required, so if you have not signed the NDA with NXP yet, please create a standard case to initiate the NDA process.

Best regards,

Tomas