Clarifications required for SBCFS2613 Main state Faults reaction

Sivahari

Hi NXP,

Could you please confirm whether a default fail-safe reaction (assertion of FSXB and RSTB) is configured for the following faults in the respective registers?

M_TSD_FLG
M_REG_FLG
M_VSUP_FLG

Since the faults in the above registers are configured to provide an INTB indication, clarification is required on whether they also have any default fail-safe reaction, such as assertion of FSXB and/or RSTB.

Thanks,

Sivahari G

RafaR

Hello Sivahari

Good day!

I couldn't identify exactly which PN you were referring to, but in general this applies to all versions of FS26.

RafaR_0-1787266460038.png

In summary, the flags in M_TSD_FLG, M_REG_FLG, and M_VSUP_FLG are interrupt sources by default. A fail-safe reaction such as FS0B (FSXB) and/or RSTB assertion is not automatically associated with the flag itself and depends on the corresponding fail-safe configuration, with TSD faults being an explicit example that can be configured to escalate into Deep Fail Safe.

I hope this information has helped you, please let me know if you need help with anything else.

Have a great day and best of luck.

Sivahari

Hi RafaR,

I couldn't identify exactly which PN you were referring to?

I am using MFS2613AMDA6.

A fail-safe reaction such as FS0B (FSXB) and/or RSTB assertion is not automatically associated with the flag itself and depends on the corresponding fail-safe configuration.

Yes, absolutely for all regulators UV/OV fault has failsafe configuration registers "FS_I_OVUV_SAFE_REACTION1" and " FS_I_OVUV_SAFE_REACTION2 ". But Is there any provision to configure fail-safe reaction for all regulator Over Current Faults? since we have provisions to configure INTB masking/unmasking for those faults.

Example OC Faults(VBSTOV_I, VBSTOC_I, VPREOC_I, TRK1OC_I, COREOC_I)