SPL error in flash.bin for trying to compile iMX8QXP secureboot

[pramodreddy]

Compilation in iMX8QXP 

:~/Downloads/imx-mkimage(lf-6.6.3_1.0.0)$ sudo make clean && make SOC=iMX8QX REV=C0 flash_spl

imx8qm clean done

imx8qx clean done

imx8dxl clean done

imx8ulp clean done

imx93 clean done

imx91 clean done

imx95 clean done

Compiling mkimage_imx8

include misc.mak

include m4.mak

include android.mak

include test.mak

include autobuild.mak

include alias.mak

./../mkimage_imx8 -commit > head.hash

if [ -f tee.bin ]; then \

if [  ]; then \

echo "Start compress tee.bin"; \

lz4 -9 -f --rm tee.bin tee.bin.lz4; \

cp tee.bin.lz4 tee.bin; \

fi; \

if [  ]; then \

./../mkimage_imx8 -soc QX -sw_version  -rev B0 -c -ap bl31.bin a35 0x80000000 -ap u-boot-hash.bin a35 0x80020000 -ap tee.bin a35 0xFE000000 -out u-boot-atf-container.img; \

else \

./../mkimage_imx8 -soc QX -rev B0 -c -ap bl31.bin a35 0x80000000 -ap u-boot-hash.bin a35 0x80020000 -ap tee.bin a35 0xFE000000 -out u-boot-atf-container.img; \

fi; \

else \

./../mkimage_imx8 -soc QX -rev B0 -c -ap bl31.bin a35 0x80000000 -ap u-boot-hash.bin a35 0x80020000 -out u-boot-atf-container.img; \

fi

SOC: QX 

REVISION: B0 

New Container: 0

AP: bl31.bin core: a35 addr: 0x80000000

AP: u-boot-hash.bin core: a35 addr: 0x80020000

AP: tee.bin core: a35 addr: 0xfe000000

Output: u-boot-atf-container.img

CONTAINER FUSE VERSION: 0x00

CONTAINER SW VERSION: 0x0000

ivt_offset: 1024

rev: 2

Platform: i.MX8QXP B0

ivt_offset: 1024

container image offset (aligned):2000

csf_off 0x2400

flags: 0x10

Hash of the images = 

1+0 records in

1+0 records out

33792 bytes (34 kB, 33 KiB) copied, 0.000153251 s, 221 MB/s

64+1 records in

64+1 records out

32909 bytes (33 kB, 32 KiB) copied, 0.000214885 s, 153 MB/s

AP file_offset = 0x2000 size = 0x8400

Hash of the images = 

1+0 records in

1+0 records out

520192 bytes (520 kB, 508 KiB) copied, 0.000895716 s, 581 MB/s

1014+1 records in

1014+1 records out

519649 bytes (520 kB, 507 KiB) copied, 0.0041585 s, 125 MB/s

AP file_offset = 0xa400 size = 0x7f000

Hash of the images = 

1+0 records in

1+0 records out

591872 bytes (592 kB, 578 KiB) copied, 0.00138488 s, 427 MB/s

1155+1 records in

1155+1 records out

591528 bytes (592 kB, 578 KiB) copied, 0.00404481 s, 146 MB/s

AP file_offset = 0x89400 size = 0x90800

CST: CONTAINER 0 offset: 0x0

CST: CONTAINER 0: Signature Block: offset is at 0x190

Offsets = 0x0 0x190

DONE.

Note: Please copy image to offset: IVT_OFFSET + IMAGE_OFFSET

./../mkimage_imx8 -soc QX -rev B0 -dcd skip -append mx8qxc0-ahab-container.img -c -scfw scfw_tcm.bin -ap u-boot-spl.bin a35 0x00100000 -out flash.bin

SOC: QX 

REVISION: B0 

DCD: skip

New Container: 0

SCFW: scfw_tcm.bin

AP: u-boot-spl.bin core: a35 addr: 0x00100000

Output: flash.bin

CONTAINER FUSE VERSION: 0x00

CONTAINER SW VERSION: 0x0000

ivt_offset: 1024

rev: 2

Platform: i.MX8QXP B0

ivt_offset: 1024

header tag missmatched ca

container image offset (aligned):13400

csf_off 0x13800

flags: 0x10

Hash of the images = 

1+0 records in

1+0 records out

174080 bytes (174 kB, 170 KiB) copied, 0.000434511 s, 401 MB/s

338+1 records in

338+1 records out

173120 bytes (173 kB, 169 KiB) copied, 0.000963655 s, 180 MB/s

SCFW file_offset = 0x13400 size = 0x2a800

Hash of the images = 

1+0 records in

1+0 records out

132096 bytes (132 kB, 129 KiB) copied, 0.000203474 s, 649 MB/s

256+1 records in

256+1 records out

131230 bytes (131 kB, 128 KiB) copied, 0.000234614 s, 559 MB/s

AP file_offset = 0x3dc00 size = 0x20400

CST: CONTAINER 0 offset: 0x400

CST: CONTAINER 0: Signature Block: offset is at 0x510

Offsets = 0x400 0x510

DONE.

Note: Please copy image to offset: IVT_OFFSET + IMAGE_OFFSET

append u-boot-atf-container.img at 376 KB

1127+0 records in

1127+0 records out

1154048 bytes (1.2 MB, 1.1 MiB) copied, 0.00305697 s, 378 MB/s

But when i checked in flash.bin below is error i am getting, How to fix this

strings flash.bin | grep -i spl
spl: ERROR: unsupported device
SPL: Unsupported Boot Device!
SPL: failed to boot from all boot devices
U-Boot SPL 2024.04-lf_v2024.04+g6c4545203d1+p0 (Nov 15 2024 - 04:02:13 +0000)
SPL: Image overlaps SPL
SPL: Image too large
spl: unsupported mmc boot device.
spl: could not initialize mmc. error: %d
spl: could not find mmc device %d. error: %d
spl: mmc init failed with error: %d
spl: mmc partition switch failed
spl: mmc: wrong boot mode
display_init
Display the FIPS mode of the SoC by reading fuse 0xA, bit 3
Successfully finished the power up sequence of display.
SPL Phase
TI Keystone SPL Image
TI OMAP SPL With GP CH
sfspl
StarFive SPL Image
display MMC info
u-boot,dm-spl
splashimage=0x9e000000
display-timings
display-subsystem
fsl,imx-display-subsystem
//ldb@562210e0/lvds-channel@0/display-timings/timing0
display0
display1
split_vm_region

[Manuel_Salas]

Hello @pramodreddy 

I hope you are doing very well.

Actually, the command strings flash.bin that you are running is not a runtime error. That command is looking for static strings compiled into the binary.

Best regards,

Salas.

[pramodreddy]

HI @Manuel_Salas 

  Deatils_flash.png.

Please check this. we are currently only using flash but not flash_spl. i am trying to generate and sue flash_spl.

I been following user guide og NXP PFA. Generate_flash and using and following the steps.

sudo make clean &&  make SOC=iMX8QX REV=C0 flash_spl using this command to generate flash.bin.

flash.bin is generated successfully. But once this flashed 100%  that's it struck no done or nothing amd terminla is not coming out of it and also furthur wic flashing is not allowed.

Help me where could i gone wrong.

Thanks In advance

Please ping  for any furthur details

[pramodreddy]

HI @Manuel_Salas 

Below are the steps we are following 

a. cp BUILD_DIR/tmp/deploy/images/imx8qxpc0mek/imx-boot-tools/bl31-imx8qx.bin iMX8QX/bl31.bin
b. cp BUILD_DIR/tmp/deploy/images/imx8qxpc0mek/imx-boot-tools/mx8qxc0-ahab-container.img iMX8QX/
c. cp BUILD_DIR/tmp/deploy/images/imx8qxpc0mek/imx-boot-tools/u-boot-imx8qxpc0mek.bin-sd iMX8QX/u-boot.bin
d. cp BUILD_DIR/tmp/deploy/images/imx8qxpc0mek/imx-boot-tools/u-boot-spl.bin-imx8qxpc0mek-sd iMX8QX/u-boot-spl.bin

a. Copy the scfw_tcm.bin to imx-mkimage/iMX8QX
b. sudo make clean &&  make SOC=iMX8QX REV=C0 flash_spl


Note : current Target which we are using iMX8QXPC0