Profinet porting on iMX95EVK

[Gaurav-Chhatrashali]

Hi,

I am trying to port NXP-Port GMBH provided profinet stack on my iMX95 EVK on linux core

I have found access to below link where it is tested on i.MX-RT1180 and also on iMX94.
Profinet stack link 

My queries are:

1. Please confirm imx95 supports this and this stack can be ported for evaluation purpose.

2. Please also share any documents that I can refer to port this stack on linux.

Please let me know if you need any other information from my end.

Thanks

Gaurav 

[Gaurav-Chhatrashali]

Hi @Oswalag ,

Thanks for the reply.

I have checked that imx94 and imx95 are quite similar and if the stack is working on imx94 then with some efforts it should be portable on imx95.

I have few queries:

1. Please confirm whether profinet stack is ported on M7 core or linux core  on IMX94.

2. Are there any documents available that can help with porting on IMX94?

Thanks,

Gaurav

[Oswalag]

Hello, 

Please check the following fact-sheet, there is information about the core's roles

 https://www.nxp.com/docs/en/fact-sheet/PROFINETFS.pdf

All the available documentation is in https://www.nxp.com/design/design-center/software/development-software/software-for-industrial-netwo...

For more information you can contact NXP Pro Support services 

[Gaurav-Chhatrashali]

Hi,

Any update on this query.

[Oswalag]

I hope his email finds you well, 

At this moment, i.mx95 doesn't support the PROFINET Industrial Ethernet Protocol Software.

Only the mentioned devices: 

Oswalag_0-1786397230469.png