Hello,
i'm using 20XS4200 dual switch to drive a motor load or a Bulb load. i want to implement the auto-retry feature in order to protect my HW.
according to reference manual of the 20XS4200 circuit to activate the Auto-retry feature i need to update the retry_s bit in the RETRYR register with the correct value according to CONF[x] pin.
the behavior i got is that the auto retry works only with bulb load.
Used Configuration is:
- retry_s set to 0 when CONF = 0 ==> Bulb Load ==> Auto retry works fine
- retry_s set to 1 when CONF = 1 ==> Motor Load ==> Auto retry do not work, the output is turned down for good from the first time.
any help would be appreciated. thanks in advance.
It is identical to the internal case #00149494, which has already been answered.