MCX Lab Expansion Boards

[#1]

MCX Lab: Expansion Boards

The MCX Lab is supported by multiple NXP-designed expansion boards that can be connected to FRDM-MCXN947 board. The expansion boards are useful for introductory labs, featuring combination of buttons, joystick, DIP switch, rotary encoder, LED ring, potentiometer, IR sensors, OLED display, and more.

FRDM-TEACH

The FRDM-TEACH provides combination of buttons, switches, LEDs, potentiometer, rotary encoder, RTC and square wave generator:

• 4x buttons
• 2x4 DIP switches
• 5x Jumpers
• LED bar with 10x LEDs
• RGB LED
• External GPIO circuit with LEDs
• Real-time circuit
• Square wave generator
• Temperature sensor
• Potentiometer
• Rotary encoder with pushbutton
• Arduino compatible connectors

The FRDM-TEACH is used in Basic laboratory assignments for FRDM-MCXN947. See MCX Lab Educational Materials page for more.

MCXN947-SHD-OLED

The MCXN947-SHD-OLED provides combination of buttons, switches, LEDs, OLED, potentiometer, rotary encoder and multiple sensors:

• 4x buttons
• 8x DIP switches
• 5 position tactile switch
• 8x LEDs in ring configuration
• OLED 128 x 64 display
• Potentiometer
• Rotary encoder
• Light sensor
• Humidity and temperature sensor
• Thermistor
• IR receiver
• Arduino compatible connectors

LCD-PAR-S035

The LCD-PAR-S035 is a 3.5” 480x320 IPS TFT LCD module with wide viewing angle and 5-point capacitive touch functionality that we recommend to use with the FRDM-MCXN947 board.

See also LCD-PAR-S035 homepage.

Expansion Board Hub

Explore the Expansion Board Hub for more modules with sensors, actuators, interfaces, displays, wireless modules etc.