CLRC632 Product Stamp

[rainbowbutterfl]

Hi

Is there a product stamp definition available for the CLRC632 product stamp printed on the package? The datasheet does not tel anything about it.

The reason i ask is, we have strange behavior with some ics and the problems correlate with the printed code on the package.

For example, this ones ic code is good:

CLRC632 01T
CEM272           03
TnG14430

This one behaves strange:

CLRC632 01T
CZS189           04
TnG21080

Please advise. Thank you.

[fangfang]

Hello,

Unfortunately, There is no the marking information as the datasheet. Should be confidential. Our support center is not authorized to check or release marking. Please contact to our authorized local distributor for confirm it.

URL: https://www.nxp.com/support/sample-buy/distributor-network:DISTRIBUTOR.

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

[rainbowbutterfl]

Thank you for your response. Unfortunately the link does not work. Anyway, my experience is that NXP distributors know less. If there is no official document in the docstore one can name, there is obviously no way to get that.

Principally if there are no known issues with some production lots, i will have to further investigate.

Thanks

[fangfang]

Hello,

Thanks for information. You may try the link again. URL: https://www.nxp.com/support/sample-and-buy/distributor-network:DISTRIBUTORS.
If your products are purchased from authorized local distributor who should help you confirm this information.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------