Hi everyone,
When I use the motor control toolbox for s12zvm,the error is blow:
Error evaluating <a href="matlab:Simulink.internal.OpenCallbackParamsDialog(['adc'],'InitFcn');">'InitFcn'</a> callback of block_diagram '<a href="matlab:open_system ('adc')">adc</a>'.
I think the error is caused by the hostid,which in my machine is xxxxx,in others machine is xxxxxxxx.I need the new 'mcd_s12z_hostid.p' file and 'mcd_s12zvm_hostid.p' file.
Solved! Go to Solution.
hi zenghongjin@chegustech.com,
I attached here the mcd_s12zvm_hostid.p file. Before you copy the new .p file please rename the old one as mcd_s12zvm_hostid.p.old.
Please copy the mcd_s12zvm_hostid.p file into the following folder :
{Toolbox install dir}\mctbx_s12zvm\mctbx_s12zvm\mscripts\
Please let us know if you have further issues with this.
Kind regards,
Razvan.
hi zenghongjin@chegustech.com,
I attached here the mcd_s12zvm_hostid.p file. Before you copy the new .p file please rename the old one as mcd_s12zvm_hostid.p.old.
Please copy the mcd_s12zvm_hostid.p file into the following folder :
{Toolbox install dir}\mctbx_s12zvm\mctbx_s12zvm\mscripts\
Please let us know if you have further issues with this.
Kind regards,
Razvan.