Hello All,
I am trying to read the on chip temprature sensor. To calculate the temprature value i Need the Parameters TSCA and TSCB from the UTEST Memory. If i understand correct, the values are located at 0x00400000, 0x00400002, 0x00400004 and 0x00400006.
In my case but i those Flash Locations are unprogrammed and i am reading 0xFFFF for all the Parameters.
Am i missing something?
Thank you all.
Hi,
It sounds like you have pre-production part and it is possible, and very likely, that it does not have anything programmed into UTEST.
Here is the data I read from device I have (PPC5777CMM0, 2N45H)
Address Data
0x00400000 0x00CF0007
0x00400004 0x00940013
BR, Petr