MPC5744&MC33771

[gary1232]

Hello everyone, I recently purchased a DEVKIT-MPC5744P to implement BMS design. The power management chip used is MC33771, and the development environment is S32D. I would like to ask you what you need to pay attention to. It would be better if there are examples~

#MPC5744 

[petervlna · Accepted solution]

Hello,

The kit is plug and play if you use the default SW. Like examples from NXP present in S32design studio.

I see no risks here except censorship (but I guess you will skip it in development).

You can basically load any SW into it.

Here is the guide for uC and SBC connection:

https://www.nxp.com/docs/en/application-note/AN5099.pdf

on top of that you can go trough getting started guide:

https://www.nxp.com/document/guide/getting-started-with-the-devkit-mpc5744p:NGS-DEVKIT-MPC5744P

All information available for this kit and all supporting documentation can be found at:

https://www.nxp.com/design/design-center/development-boards-and-designs/automotive-development-platf...

best regards,

Peter

[gary1232]

Hi,Peter
Thanks for your reply.
I have buy a dekit-5744 and mc33664b board,
If I want to try on s32ds environment, have any example can let me quickly verification functions?
Cause i saw more reference is from MBD, not from s32ds.

[petervlna]

Hello,

Yes, there are SPI examples in the S32DS in RTD packages for MPC5744P.

Install S32DS, driver package and open project from example.

Best regards,

Peter

[petervlna]

Hello,

In S32DS you have plenty of examples for evaluation:

Just install driver package you want to use and create project from example.

Or you can use our examples posted on community:

https://community.nxp.com/t5/MPC5xxx-Knowledge-Base/MPC5-software-example-list/ta-p/1102445#MPC5744P

Best regards,

Peter

[gary1232]

Hi,Peter
some questions want to you help~!
i want to use "printf" functions on my project,
and let for printf number transmit to PC Tera.
but i dont know how to do, do you have any example can let me learn......

Sorry...im newbie..