MPC555LF8MZP40

[Paulo18]

Hi, I have a multiprogrammer that has (MPC555XX) listed. I need to read and write an MPC555LF8MZP40. Has anyone done this before?

[davidtosenovjan]

Could you specify used programmer?

[Paulo18]

Xhorse Multi-Prog Programmer

[davidtosenovjan]

This apparently tool for ECU programming. I would recommend to contact its manufacturer.

I am afraid I cannot help better way.

[Paulo18]

Could you tell me which programmer to use to read and write to this processor?

[davidtosenovjan]

USB-ML-UNIVERSAL-FX should be capable to flash it using their own programming SW.

https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320180&productTab=5051

I would recommend to consult with PeMicro support:
https://www.pemicro.com/support/index.cfm

Historically it is supported by following Codewarrior version
https://www.nxp.com/design/design-center/software/development-software/codewarrior-development-tools...

and CodeWarrior USB TAP BDM probe.

However this environment requires using of Windows XP or older.